<th id="qgkop"></th>
    <rp id="qgkop"><object id="qgkop"><input id="qgkop"></input></object></rp>
      <tbody id="qgkop"><pre id="qgkop"></pre></tbody>

        新聞中心您當前的位置:首頁 > 新聞中心
        鋼塑復合產品防腐儲罐
        發布時間:2019-04-28 瀏覽量:1749
        我公司生產的鋼塑復合產品采用特殊滾塑成型工藝。它將鋼網(龜甲)焊接于鋼體表面,以線性聚乙烯(LLDPE)為原料,使用滾塑工藝將鋼板、鋼網(龜甲) 與聚乙烯有機結合成一體,聚乙烯牢固沾與缸體表面。(Steel plastic composite products produced by our company adopts special rotational molding technology. The steel mesh (Gui Jia) welding in the steel surface with linear polyethylene (LLDPE) as raw materials, the use of rotational molding process make the steel plate, steel net (Gui Jia) together with the organic combination of polyethylene, polyethylene with solid and cylinder surface.) 
         
        ①鋼塑復合產品在使用時,因環境不同,桶體外表油漆會老化剝落,須對其進行每年或兩年一次的復漆,確保鋼體不腐蝕;(When the steel plastic composite product is used, the paint on the outside of the barrel will be aged and flaking because of the different environment, so it should be re painted every year or two years to ensure that the steel body is not corroded;)
         
        ②一般來說,鋼體外表不得進行電焊、鉆孔等操作,如確需進行焊接,請咨詢本公司;(Generally speaking, the steel body shall not be covered by electric welding, drilling and other operations. If it is necessary to carry out welding, please consult our company;)
         
         
        ③在沒有專業技術人員的指導下,不得在鋼體外表施以100℃以上的直火溫度。(Under the guidance of no professional technicians, the direct fire temperature above 100 DEG C shall not be applied to the steel body.)
         
         4、防腐儲罐應設計呼吸閥、液壓閥等,有需要的客戶可以設計排污閥及溢流閥。
         
        5、儲油罐應設計避雷防靜電接地裝置
         
        6、罐體周圍應設置圍堰,以防萬一罐體出現泄露情況,易燃液體周圍需配置滅火器,每年檢查一次罐體及滅火裝置安全問題。
        >> 返回
      首 頁|關于我們|新聞中心|產品展示|企業文化|聯系我們
      日本大胆裸体A级视频